Minuteman SNMP-32 Series Manual de usuario descargar pdf (Pagina 11)

4-2. Information: System Status

This screen shows the SNMP-32 card’s System Information and Network setting (Fig. 12). The information shown is

provided by SNMP-32 card or it is the user settings from the SNMP Utility Configuration pages.

1. System Information:

This section shows the System Information. The Firmware Version, the Serial Number and the System Time are

provided by SNMP-32 card. The other information is the user settings from the SNMP Utility Configuration

pages.

2. Network Status:

This section shows the Network settings. The MAC address is provided by SNMP-32 card. The other

information is the user settings from the SNMP Utility Configuration pages.

Fig. 12-System Status Screen

4-3. Configuration: Network

This screen is to set the Network settings (Fig. 13).

NOTE:

SNMP-32 card will reboot after making changes to any of the following sections.

1. IP Address:

This section is to set the IP address.

2. Subnet Mask:

This section is to set the Subnet Mask.

3. Gateway:

This section is to set the Gateway.

4. Obtain an IP address:

This section is to choose to set the IP address manually or via DHCP.

NOTE:

The four sections above can be set in either the SNMP Utility or the SNMP-32 card’s Web pages.

5. Primary DNS Server IP:

This section is to set the Primary DNS Server IP address.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Sin comentarios

Minuteman SNMP-32 Series Manual de usuario Pagina 11